3 min read
This section covers designs for high availability network services in the access layer. Redundancy Models When designing a network topology...
Debbie Sturm
3 min read
2 min read
Virtual Router Redundancy Protocol (VRRP) is a router redundancy protocol defined in RFC 3768. VRRPv2 supports only IPv4. RFC 5798...
2 min read
Virtual Switching System (VSS) solves the Spanning Tree Protocol unused blocked links problem by converting the distribution switching pair into...
3 min read
Designing redundant routes has two purposes: balancing loads and increasing availability. Load Balancing Most IP routing protocols can balance loads...
2 min read
In mission-critical applications, it is often necessary to provide redundant media. In switched networks, switches can have redundant links to...
2 min read
A campus LAN connects two or more buildings within a local geographic area using a high-bandwidth LAN media backbone. Usually,...
2 min read
For the access layer of a campus LAN, you can classify and mark frames or packets to apply quality-of-service (QoS)...
2 min read
WANs provide network connectivity for the enterprise core and remote branch locations. The enterprise edge, on the other hand, securely...
2 min read
Enterprises can have multiple WAN interconnections. WAN connectivity between an organization’s headquarters and remote sites is generally across a service...
3 min read
Several factors should be considered when selecting a WAN transport technology. Some WAN options are public Internet based, and some...
